10-22-2006, 04:07 PM
Los valores originales en el menu de servicio:
6. GGL 1000
7. GRL 1024
8. GBL 815
Hoy hice los siguientes cambios tratando de mejorar la imagen de acuerdo a las recomendaciones de un cuate en avs - Sourcery
Picture Mode: Natural
[The "picture mode" sets the auto-iris, and I believe it may also change the contrast and/or gamma. The other two modes are Bright and Brilliant. Contrast, brightness and color temperature must be set independently for each picture mode, all other settings are shared among the three picture modes]
Color Temperature: Low
Brightness: 30-32 for typical lighting conditions (but you can go much lower for extremely low light conditions)
Contrast: 34
Deep Field Imager: Off
Color: 20
Tint: 31 (Factory Default)
Video Noise: HD=Low/Medium; SD=Off (this is important)
Sharp Edge: HD=Off; SD=On (this is important)
Sharpness: 0
Perfect Color: Factory Defaults
Perfect Tint: Factory Defaults, exept for the following:
..Magenta: 37
..Yellow: 27
..Cyan: 33
6. GGL 1000
7. GRL 1024
8. GBL 815
Hoy hice los siguientes cambios tratando de mejorar la imagen de acuerdo a las recomendaciones de un cuate en avs - Sourcery
Picture Mode: Natural
[The "picture mode" sets the auto-iris, and I believe it may also change the contrast and/or gamma. The other two modes are Bright and Brilliant. Contrast, brightness and color temperature must be set independently for each picture mode, all other settings are shared among the three picture modes]
Color Temperature: Low
Brightness: 30-32 for typical lighting conditions (but you can go much lower for extremely low light conditions)
Contrast: 34
Deep Field Imager: Off
Color: 20
Tint: 31 (Factory Default)
Video Noise: HD=Low/Medium; SD=Off (this is important)
Sharp Edge: HD=Off; SD=On (this is important)
Sharpness: 0
Perfect Color: Factory Defaults
Perfect Tint: Factory Defaults, exept for the following:
..Magenta: 37
..Yellow: 27
..Cyan: 33